DJI Matrice 400 Plus Combo – Zenmuse H30T, S1 Spotlight, V1 Speaker
$32,244.00
Not in stock today
Ask about this item
Or call us on 440-420-0200.
Lead time
Confirmed in writing with your quote.
Purchase orders
Ask us before you raise one.
Repaired in Akron
Yes19,000 sq ft, in-house parts department.
Pairs well with
About this item
A DJI Matrice 400 package for public safety and inspection: the aircraft with Zenmuse H30T thermal camera, Zenmuse S1 spotlight, and Zenmuse V1 speaker, plus the BS100 battery station.
Specs
- Max flight time: 59 min (with H30T only). Max hover: 53 min. Max payload: 6 kg
- IP55. Operating temperature: -20 to 50 °C (-4 to 122 °F). Max wind resistance: 12 m/s
- Max horizontal speed: 25 m/s. Max takeoff altitude: 7000 m
- Sensing: omnidirectional vision, rotating LiDAR, upper LiDAR, six-direction mmWave radar. Built-in ADS-B In
- Video transmission: DJI O4 Enterprise Enhanced, up to 40 km (FCC), three 1080p/30fps live feeds
- TB100 battery: 20254 mAh, 977 Wh, 400 cycles, self-heating
- BS100 station: charges three TB100 and two WB37 batteries; TB100 0–100% in about 45 min (220 V, fast mode) or 70 min (110 V, fast mode)
- Zenmuse H30T: 40 MP zoom (34x hybrid optical, 400x max), 48 MP wide, 1280 × 1024 thermal, laser rangefinder 3–3000 m, IP54
- Zenmuse S1: up to 40 lux @ 100 m on Matrice 400 (Both On mode), low beam 15°, high beam 4°
- Zenmuse V1: 129 dB @ 1 m and 700 m broadcast distance on Matrice 400; text-to-speech
In the kit
- Matrice 400 aircraft (with propeller holder)
- DJI RC Plus 2 Enterprise Enhanced remote controller (with sub-2G SDR module)
- WB37 battery × 3 (for the controller)
- BS100 Intelligent Battery Station
- Zenmuse H30T with Enterprise Care Plus
- Zenmuse S1
- Zenmuse V1
- Dual gimbal connector
- TB100 Intelligent Flight Battery
- Carrying case
- Landing gear × 2
- Propeller pairs × 2
- Propeller washers and screws × 6
- Remote controller strap and bracket
- USB-C to USB-C cable and power cable
- Gimbal dampers × 4
- Screws and tools set, cleaning tools set, rubber port covers and screws set
- Hoodman 5 ft Launch / Landing Pad
Compatibility
- DJI RC Plus 2 Enterprise Enhanced (Matrice 400 controller)
- Also supports Zenmuse L3, L2, H30, P1, DJI AP100 Parachute, D-RTK 3 / D-RTK 2
Public-safety agencies: gov@ohiodronerepair.com
In the field
Our photos

Repaired here, too.
If it ever needs work, it comes back to the same shop in Akron that sold it.
How a repair goes