© DJI
Solar farms
From bare land to as-built arrays.
Details
- Topo and drainage surfaces for layout
- Construction progress across large sites
- As-built orthomosaics of the array
Survey, Mapping & AEC
EnergySolar, wind
© DJISolar, wind
& pipelines
Site design, construction tracking and asset records for energy projects.
Request a survey quoteAuthorized dealerWingtraXGRIDSDJI Enterprise
Use cases
Across the energy site
© DJI
© DJI
Wind sites
Pads, roads and towers.
Details
- Site and access-road surveys
- Zoom imagery of towers and blades
- Repeat records from saved routes
© DJI
Pipeline corridors
The right-of-way, mile after mile.
Details
- Corridor orthomosaics and surfaces
- Lidar for terrain under vegetation
- Change records between flights
© DJI
Facilities
Models of complex plants.
Details
- Overall models of pads and plants
- Handheld scans of piping and equipment rooms
- Imagery for planning and records
Photo courtesy of Wingtra
Vegetation & clearance
See what’s growing toward the asset.
Details
- Lidar classifies vegetation and ground
- Measure distances in the point cloud
- Plan maintenance from the model
Thermal and substations?Our Utilities & Infrastructure page covers thermal inspection and docked monitoring. See utilities
Recommended kit
The right tools for the job
© DJI
Matrice 400 + Zenmuse L2 / P1
Heavy-lift lidar and full-frame photogrammetry.
Key specs
- Matrice 400: 6 kg max payload (third gimbal connector, sea level), IP55
- Zenmuse L2: 5 cm horizontal / 4 cm vertical system accuracy at 150 m (DJI test conditions, DJI Terra), up to 5 returns
- Zenmuse P1: 45 MP full frame, 3 cm horizontal / 5 cm vertical absolute accuracy (3 cm GSD, 75% / 55% overlap)
- Shop the Zenmuse L2 or Zenmuse P1
Photo courtesy of Wingtra
WingtraRAY
Fixed-wing range for big areas. Vertical take-off.
Key specs
- Up to 550 ha (1,360 ac) per flight with the MAP61 sensor at 120 m (400 ft)
- 3 cm (0.1 ft) absolute accuracy (RMS x, y, z) with PPK, under Wingtra’s recommended workflow
- Up to 59 min flight time (RGB, multispectral), 45 min with LIDAR
- Swappable RGB, LIDAR and multispectral sensors
- NDAA, Blue and Green UAS cleared (US)
© DJI
DJI Matrice 4E
Compact mapping drone. Fast to deploy, every week.
Key specs
- 4/3 CMOS 20 MP wide camera with mechanical shutter
- 0.5 s minimum photo interval
- RTK: 1 cm + 1 ppm horizontal, 1.5 cm + 1 ppm vertical
© DJI
DJI Dock 3
The drone lives on site and flies on schedule.
Key specs
- IP56 dock that houses one Matrice 4D or 4TD
- Matrice 4D: 4/3 CMOS 20 MP wide camera with mechanical shutter
- Up to 10 km max operating radius (DJI test conditions)
© XGRIDS
Lixel handheld SLAM lidar
Walk it. Scan it. Indoors, under structures, where GNSS drops out.
Key specs
- Lixel L2 Pro: 3 cm real-time absolute accuracy, 1 cm relative accuracy after processing
- Lixel L2 Pro: 320,000 / 640,000 points per second
- Lixel L3: 5 mm relative accuracy
- XGRIDS LCC: Gaussian splatting platform for capture, editing and cross-platform delivery
© DJI
DJI Terra, Modify & FlightHub 2
Process, clean up and share the data.
Key specs
- DJI Terra: 2D and 3D reconstruction from imagery, DJI lidar processing, multispectral reconstruction and 3D Gaussian Splatting
- DJI Modify: point cloud smoothing, noise reduction, downsampling and classification; one-click mesh repair for holes, floating objects and vehicles
- DJI FlightHub 2: missions, media and models in the cloud. About FlightHub 2
Deliverables
What you get back
Orthomosaic
A true-scale, measurable map image.
More
Distortion-corrected, georeferenced imagery for measuring distances and areas. Typically delivered as GeoTIFF.
Point cloud
Measured 3D points.
More
From lidar or photogrammetry. DJI Terra exports PNTS, LAS, PLY, PCD and S3MB; Wingtra software exports LAS or CSV.
DSM / DTM
Surface and bare-earth models.
More
The DSM includes buildings and canopy. The DTM is ground only, built from ground-classified points.
Digital twin
A model of the asset as it stands.
More
Point clouds, meshes or Gaussian splats you can measure, share and revisit.
Inspection images
Close-ups tied to location.
More
Geotagged photos and zoom frames organized by structure or route.
Profiles & sections
Cross-sections along a line.
More
Cut profiles along a road, rail or pipe centerline from the surface model.
Workflow
Plan > Fly > Process > Deliver
© DJI
Plan
Area, resolution, control.
Details
- Map the site or corridor boundary
- Check access, permits and airspace
- Choose lidar, RGB or both
© DJI
Fly
Automated, repeatable routes.
Details
- Grid flights for sites, corridor flights for lines
- RTK or PPK positioning
- Close passes for towers and equipment
© DJI
Process
Terra, Modify, Wingtra software, LCC.
Details
- DJI Terra: photogrammetry, DJI lidar and Gaussian splats
- DJI Modify: clean and classify point clouds, repair meshes
- Wingtra software or XGRIDS LCC for their own data
© DJI
Deliver
Files your team already uses.
Details
- Orthomosaics and surfaces
- Classified point clouds
- Asset imagery organized by location
Support
FAQ
Ohio Drone Repair
- Kitting: aircraft, sensors, batteries and cases set up around your crew.
- Repair bench in Akron, Ohio, with a free estimate, for the drones we service.
- Warranty help: we coordinate manufacturer service for the rest of your kit.
Can you help with solar thermal inspection?
Thermal work is covered on our Utilities & Infrastructure page. This page focuses on mapping and models.
Lidar or photogrammetry for pipelines?
Lidar for terrain under trees and brush; photogrammetry for open ground and true-color maps.
Can a dock fly our site on a schedule?
DJI Dock 3 flies repeat missions from the site. Plan coverage within its operating radius.
Do you sell to contractors and owners?
Yes. Request a quote with the site size and deliverables.
Who processes the data?
Your team, in DJI Terra, DJI Modify, Wingtra software or XGRIDS LCC. We help you set it up.
Get a quote
Send us the site
Area, deliverables and deadline. We’ll match the kit and quote it.
More industries
Specifications are manufacturer figures from official pages, checked October 11, 2026: Matrice 400, Zenmuse L2, Zenmuse P1, WingtraRAY, DJI Matrice 4 Series, DJI Dock 3, XGRIDS Lixel L2 Pro, Lixel L3, XGRIDS LCC, DJI Terra, DJI Modify. Accuracy depends on the site, control and workflow.
Wingtra and WingtraRAY are trademarks of Wingtra AG. XGRIDS, Lixel, PortalCam and LCC are trademarks of XGRIDS. DJI, Matrice, Zenmuse, DJI Terra, DJI Modify and FlightHub are trademarks of SZ DJI Technology Co., Ltd. Images © DJI; photos courtesy of Wingtra; images © XGRIDS, used with permission; Ohio Drone Repair.