© DJI
Wetlands & waterways
Edges, channels and vegetation.
Details
- Orthomosaics for delineation support
- Surfaces for drainage and flow
- Repeat flights to track change
Survey, Mapping & AEC
Environmental & agricultureLand, water
© DJILand, water
& crops
Map wetlands, erosion, fields and forests, and track change over time.
Request a survey quoteAuthorized dealerWingtraXGRIDSDJI Enterprise
Use cases
Out in the landscape
© DJI
Photo courtesy of Wingtra
Erosion & slopes
Measure what moved.
Details
- Compare surfaces between flights
- Lidar for ground under vegetation
- Banks, gullies and slopes
© DJI
Crop & field mapping
Whole fields in one flight.
Details
- RGB orthomosaics for scouting and records
- Field boundaries and drainage
- Large areas with fixed-wing range
Photo courtesy of Wingtra
Multispectral (sensor-dependent)
Vegetation maps need the right sensor.
Details
- WingtraRAY offers a multispectral sensor option
- DJI Terra supports multispectral reconstruction
- Standard RGB cameras don’t produce vegetation indices
Photo courtesy of Wingtra
Forestry
Canopy and ground in one dataset.
Details
- Lidar for terrain under canopy
- Canopy surfaces and stand structure
- Access roads and harvest areas
Recommended kit
The right tools for the job
Photo courtesy of Wingtra
WingtraRAY
Fixed-wing range for big areas. Vertical take-off.
Key specs
- Up to 550 ha (1,360 ac) per flight with the MAP61 sensor at 120 m (400 ft)
- 3 cm (0.1 ft) absolute accuracy (RMS x, y, z) with PPK, under Wingtra’s recommended workflow
- Up to 59 min flight time (RGB, multispectral), 45 min with LIDAR
- Swappable RGB, LIDAR and multispectral sensors
- NDAA, Blue and Green UAS cleared (US)
© DJI
Matrice 400 + Zenmuse L2 / P1
Heavy-lift lidar and full-frame photogrammetry.
Key specs
- Matrice 400: 6 kg max payload (third gimbal connector, sea level), IP55
- Zenmuse L2: 5 cm horizontal / 4 cm vertical system accuracy at 150 m (DJI test conditions, DJI Terra), up to 5 returns
- Zenmuse P1: 45 MP full frame, 3 cm horizontal / 5 cm vertical absolute accuracy (3 cm GSD, 75% / 55% overlap)
- Shop the Zenmuse L2 or Zenmuse P1
© DJI
DJI Matrice 4E
Compact mapping drone. Fast to deploy, every week.
Key specs
- 4/3 CMOS 20 MP wide camera with mechanical shutter
- 0.5 s minimum photo interval
- RTK: 1 cm + 1 ppm horizontal, 1.5 cm + 1 ppm vertical
© DJI
DJI Terra, Modify & FlightHub 2
Process, clean up and share the data.
Key specs
- DJI Terra: 2D and 3D reconstruction from imagery, DJI lidar processing, multispectral reconstruction and 3D Gaussian Splatting
- DJI Modify: point cloud smoothing, noise reduction, downsampling and classification; one-click mesh repair for holes, floating objects and vehicles
- DJI FlightHub 2: missions, media and models in the cloud. About FlightHub 2
Deliverables
What you get back
Orthomosaic
A true-scale, measurable map image.
More
Distortion-corrected, georeferenced imagery for measuring distances and areas. Typically delivered as GeoTIFF.
DSM / DTM
Surface and bare-earth models.
More
The DSM includes buildings and canopy. The DTM is ground only, built from ground-classified points.
Point cloud
Measured 3D points.
More
From lidar or photogrammetry. DJI Terra exports PNTS, LAS, PLY, PCD and S3MB; Wingtra software exports LAS or CSV.
Contours
Elevation lines for CAD.
More
Generated from the DTM at the interval your plan set calls for.
Volumes & cut/fill
Quantities between two surfaces.
More
Compare a flown surface to design or to an earlier flight to report cut, fill and stockpile volumes.
Workflow
Plan > Fly > Process > Deliver
© DJI
Plan
Area, resolution, control.
Details
- Define the area and the change you need to see
- Choose RGB, lidar or multispectral
- Plan around wildlife, weather and access
Photo courtesy of Wingtra
Fly
Automated, repeatable routes.
Details
- Same route each season for comparisons
- RTK or PPK positioning
- Consistent altitude and lighting
© DJI
Process
Terra, Modify, Wingtra software, LCC.
Details
- DJI Terra: photogrammetry, lidar and multispectral reconstruction
- DJI Modify: ground classification and clean-up
- Wingtra software for Wingtra data
© DJI
Deliver
Files your team already uses.
Details
- Orthomosaics and surfaces
- Classified point clouds
- Change comparisons between dates
Support
FAQ
Ohio Drone Repair
- Kitting: aircraft, sensors, batteries and cases set up around your crew.
- Repair bench in Akron, Ohio, with a free estimate, for the drones we service.
- Warranty help: we coordinate manufacturer service for the rest of your kit.
Can I get NDVI from any drone?
No. Vegetation indices need a multispectral sensor, such as the WingtraRAY multispectral option. RGB maps show color, not plant health indices.
Can lidar see through trees?
Lidar pulses pass through gaps in the canopy and can reach the ground. Dense cover reduces ground points.
Will this replace a wetland delineation?
No. It supports the qualified professional doing the delineation.
How do we track erosion?
Fly the same route on a schedule and compare the surfaces between dates.
Fixed-wing or multirotor?
Fixed-wing VTOL for large areas. Multirotor for small sites and close work.
Get a quote
Send us the site
Area, deliverables and deadline. We’ll match the kit and quote it.
More industries
Specifications are manufacturer figures from official pages, checked October 11, 2026: WingtraRAY, Matrice 400, Zenmuse L2, Zenmuse P1, DJI Matrice 4 Series, DJI Terra, DJI Modify. Accuracy depends on the site, control and workflow.
Wingtra and WingtraRAY are trademarks of Wingtra AG. XGRIDS, Lixel, PortalCam and LCC are trademarks of XGRIDS. DJI, Matrice, Zenmuse, DJI Terra, DJI Modify and FlightHub are trademarks of SZ DJI Technology Co., Ltd. Images © DJI; photos courtesy of Wingtra; images © XGRIDS, used with permission; Ohio Drone Repair.